Metal Cover Metric / Inch System Conversion Vernier Depth Gauge 0.01mm Resolution

Metal Digital Depth Gauge

Features:

Manual power on/off.

Zero setting at any position.
Metric/Inch system conversion at any position.
With data output interface

Technical specification:

Function:

1. Zero setting at any position.

2. In/ metric system conversion at any position.

3. Through a special cable, the data can be input into a special microprinter.

Working way of the interface : syncjronous series

Data: Binary code, 24 bits,. Each datum wi8ll be sent twice. The cycle is 300ms (pr 20ms in fast reading state).

Transmitting time: 0.5ms.

The four wires ( from left to right) : Negative power (-), clock pulse CP, Data D, Positive Power(+).

Pulse range of data: Datum level≤ 0.2v, level "1" ≥1.3v

Close Pulse CP: 90HZ, effective for high power level.

Instruction:

1. Before using the dgital deoth gauge , clean the surface of the protective sticker with dry and clean cloth ( or soaked with cleaning oil)

2. Never apply voltage on any part of the depth gauge or engrave with an electric pen for fear of damaging the electronics.

3. Turn off the depth gauge by pressing "ON/OFF" button when the depth gauge is not in use. Take out the battery if the depth gauge will stay idle for a long time.

electronic digital caliper

electronic vernier caliper

Metal Cover Metric / Inch System Conversion Vernier Depth Gauge 0.01mm Resolution Images